Recently, Car Deal Expert shared details concerning how to deal when your car has trouble with its power locks. In the majority of cases, you’ll discover that removing the inside car door panel is required. While this may sound like a daunting task, the reality is that when it comes to fixing car door issues, removing the inside car door panel isn’t really all that difficult. Here’s a brief summary of WikiHow’s step-by-step take on the process. For this undertaking, you’ll want to have a flathead, Phillips and 12-point screwdriver handy. You may also need an Allen wrench. Keep in mind that this is general info; consult your owner’s guide for specific info concerning your car. A web search for pictures won’t hurt your chances.
Open the door before removing the inside car door panel
If you need to be able to generate any leverage at all, open the door so you can get your tools in their proper place. Without the leverage angle, you’re doing it wrong.
Need to spring that pop-up lock?
In other words, do you’ve a lock that sticks up out of the inner panel? If so, it needs to come off before the panel is removed. Luckily, they typically unscrew in a simply manner.
Level with your lever
Next, find the door manage and contemplate its removal. Below that deal with, you’ll want to the screw. After lifting the lever, you should be able to see the screw. When you are done, you should be able to remove the plastic casing that holds the lever system in place.
The armrest comes next
Look under the armrest. That’s typically where the armrest screws can be located. There may be plastic covers over these screws, however they should pop off with a flathead screwdriver. Unscrew and de-armrest. One additional step would be unplugging the wires if you have power windows. Do not worry, it is very safe – they have modular plastic ends. With a simple squeeze or two, the plastic ends will pull out.
Take care of manual window cranks
When you have an older car, the window crank is separate from the armrest procedure; in involves a plastic cap and snap ring, in that case. The flathead will help you here.
Pry it, putty please
The putty knife is a great tool to wedge between the plastic frame for separation. Be gentle when prying things apart, because you don’t want to snap the plastic grommets that attach the door to the inner cardboard plate. Do not overdo it – easy does it. Loosen the outsides, but don’t remove the inside door panel completely until completing the following step.
Lift the window out of its slot
Shattered glass ready to be stepped on is not desirable, so gently lift the window from its housing slot. Once you’re window-safe, pop the panel from the grommets. Take care of your repair issues, then follow the above process in reverse order. Just remember, do the lock hardware and then the arm rest last. Use the sticky stuff to ensure the plastic panel adheres to the metal.
Discover more details on this topic
Read more here
http://www.wikihow.com/Remove-an-Inside-Door-Panel-from-a-Car
